Special bundle offer – save over £18 off the individual prices!
We are pleased to be able to offer a special offer saving you £18.25 over the individual product prices, plus further savings on the postage rate too!
We are now pleased to be able to offer a complete LED upgrade package for the modern Bonneville, Bonneville SE, Bonneville T100, Scrambler and Thruxton models. This bundle includes our popular LED rear tail and stop light light board plus a full set of four of our new LED indicator boards. The kit is topped off with a LED compatible flasher relay unit and a diode kit (used to prevent cross-talk between the left and right sides on some models). Naturally the bundle also includes all the necessary fitting kits and the tools required to install the rear light board, just in case you don’t have these to hand. Click on the ‘bundled products’ button above for links to each of the individual product pages.
Each of our LED light boards are specifically designed for the lamps of your Triumph motorcycle. They are not generic ‘one-size-fits-all’ conversions and therefore offer substantially better brightness and illumination of the Triumph lamps than is obtained using standard LED bulbs.
The Bonneville rear LED board features a total of 26 super bright red LEDs running on the same advanced tried-and-tested circuitry that was first developed for our original Lucas 564 LED unit. That board uses a mere 10 super bright LEDs and is already as bright as the standard 21/5W filament bulb which these LED board replace, so you can imagine how visible this Bonneville unit is with 22 rear-facing LEDs providing the brake and tail light functions.
Each Bonneville LED indicator board features a total of 12 super bright yellow LEDs. LEDs turn on and off much more rapidly than conventional bulbs as there is no filament to repeatedly heat up and cool down. This results in a much more definite and conspicuous flash on and off, and hence better visibility of your bike ahead of that crucial turn or lane change.
Some factory-fitted flasher relays feature a blown bulb warning function whereby they alter the rate at which the indicators flash if they detect a blown bulb so as to alert the rider. However, with their ultra-low power consumption, these relays can often mistake a LED light conversion for a blown bulb. This LED compatible flasher relay solves all of these problems in a simple and cost efficient unit. It is completely plug-and-play for most modern Triumph models (please check the connections before ordering as some years and models may vary). Just unplug the old flasher unit and plug this new one back in its place.
The problem of feed-back illumination of the opposite direction indicators can occur when installing LED indicator conversions on motorcycles with only a single dashboard signal warning lamp. It is often found that when the left turn signals are switched on, the right ones flash too, and vice versa.
This problem is due to the single dashboard indicator tell-tale light allowing current to flow back through to the indicators which are not in use. Our LED diode kit provides a simple and cost effective solution to this problem.