Today's special offers on all fuses and fuseholders...
Buy four or more items from this category and get 20% off.
Discounts will be applied at the checkout along with special combined postage rates.
You can mix and match between any of our fuses and fuseholders to get the discount.
The easy to install fuse holder is a fast and simple way to easily add an all-important fuse to your classic motorcycle with the minimum of fuss. It features a water-resistant rubberised fuse compartment with lid to keep out the elements.
The fuse holder accepts standard blade fuses which are readily available in a wide range of ratings to suit your particular motorbike. Typically, we suggest using a 15A fuse for 6v electrics and 10A fuse for 12v electrics to protect a standard classic bike’s electrical system. More information on calculating the appropriate fuse rating for your bike can be found in my ‘Installing a fuse’ article.
Suitable blade fuses for use with this holder are available here:
1 Amp (black), 2 Amp (grey), 3 Amp (violet), 4 Amp (pink), 5 Amp (tan), 7.5 Amp (brown), 10 Amp (red), 15 Amp (blue), 20 Amp (yellow), 25 Amp (clear), and 30 Amp (green).
The fuse holder has a lead which is approximately 28cm (11 inch) long. You’ll notice in the photo’s that the lead is connected to the fuse holder in a loop; whilst this may seem strange to start with, it allows you to position the fuse holder in the best position next to your battery. Simply cut the wire at the point which positions the fuse holder in the most convenient location.
For more information and help with installing a fuse on your classic motorcycle, please refer to this article.