Description
Today's special offers on all fuses and fuseholders...
Buy four or more items from this category and get 20% off.
Discounts will be applied at the checkout along with special combined postage rates.
You can mix and match between any of our fuses and fuseholders to get the discount.
The easy-fit fuse holder is a fast and simple way to easily add an all-important fuse to your classic motorcycle with the minimum of fuss. Installation takes only a few moments – you only need to cut the existing cable, insert the two ends into either side of the fuse holder and snap it shut. There is no need to strip the ends of the wires or do any soldering. The electrical connections are made automatically when you close the fuse holder around the cable. Installing a fuse really couldn’t be any simpler!
The fuse holder accepts standard blade fuses which are readily available in a wide range of ratings to suit your particular motorbike. Typically, we suggest using a 15A fuse for 6v electrics and 10A fuse for 12v electrics to protect a standard classic bike’s electrical system. More information on calculating the appropriate fuse rating for your bike can be found in my ‘Installing a fuse’ article.
Appropriate blade fuses for use with the holder are available here:
1 Amp (black), 2 Amp (grey), 3 Amp (violet), 4 Amp (pink), 5 Amp (tan), 7.5 Amp (brown),
10 Amp (red), 15 Amp (blue), 20 Amp (yellow), 25 Amp (clear), and 30 Amp (green).
For more information and help with installing a fuse on your classic motorcycle, please refer to this article.
Reviews
There are no reviews yet.