12v Lucas 525 LED light board

A 12 volt version of our new LED light array designed to fit Lucas 525 type rear light units.
Contact me We’re currently making some changes to the website and I’m afraid that this means we are temporarily unable to accept any new orders. Apologies for any inconvenience caused and please check back again soon.
Lucas 525 tail lamp

12v Lucas 525 LED light board

£34.95

Specially designed for a perfect fit inside a Lucas 525 rear lamp unit, this 12v LED array features tail, brake and numberplate illumination using an array of super-bright wide-angle red and white LEDs.

Categories: ,

Description

Now available!

After a long wait, the Lucas 525 version of our best-selling LED rear light board is now available.  We’ve already received a lot of back orders for this new LED board so our initial stock is limited, so get yours now before they sell out!

This fantastic new LED light board has been specially designed to fit perfectly inside the red outer lens of a Lucas 525 rear motorcycle lamp as fitted to countless classic motorcycles from the 1950’s onwards. It replaces the standard filament bulb giving a huge reduction in power consumption, increased reliability and improved visibility.

Additional information

Connector options available:

A choice of electrical connector options are available as follows: – Three-wire connector (included as standard) – BAY15D bulb adapter (optional upgrade) – BA15D bulb adapter (optional upgrade) – BA15S bulb adapter (optional upgrade)
Voltage:

The operating voltage range of the LED light board is as follows: – 12.0v nominal (12.6v for lead acid battery) – 10.7v minimum (for full brightness) – 18.0v maximum
Current:

Approximate values measured at 12.0v: – 80mA for the brake light – 60ma for the tail and numberplate lights – 140mA for the brake, tail and numberplate lights
Power:

The power consumption of the LED light board operating at 12.0v is: – 0.96W for the brake light – 0.72W for the tail and numberplate lights – 1.68W for the brake, tail and numberplate lights
Number of LED's:

4x super-bright red LEDs for tail light function 6x super-bright red LEDs for brake light function 3x super-bright white LEDs for number plate illumination
Polarity:

Positive or negative earth (automatically corrects polarity)
Size:

Designed to fit perfectly inside a Lucas 564 rear light unit: – Width: 80mm – Height: 40mm – Thickness: 16mm
Weight:

Approximately 14 grams (excluding wiring and fixings)
Also included with the LED light board:

The following accessories are also included with the LED light board: – 1x wiring harness with bare terminals (or optional adapter) – 2x mounting posts – 2x M3 mounting screws – 2x M3 mounting nuts – 2x insulating washers – 4x M3 spring locking washers
Further questions?

If you have any further questions, please use the contact form at the bottom of the page to get in touch with me and I willll do my best to respond quickly with an answer.

You may also like…

Reviews

There are no reviews yet.

Be the first to review “12v Lucas 525 LED light board”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Related Products