A question I am frequently asked is: Which flasher relay unit do I need for my Triumph Bonneville motorcycle? Older bikes require a European style 3-pin design whereas newer models have switched over to using the Japanese style 2-pin units. Both of them do exactly the same job, but they are not interchangeable (at least …
After a long wait, the new Matchless Clueless six volt LED light boards for the popular Lucas 564 style rear lamps will be ready to ship soon! The 6v version of the light board has been on backorder for the last year or so whilst the circuit board has been completely redesigned to bring it …
The LED rear lights boards I designed for my old Matchless motorcycle have received quite a bit of interest lately from the guys over at the TriumphRAT owner’s club forum. It turns out that quite a few people are changing the standard rear light on their modern Triumph Bonnevilles to the Lucas 564 style light …
I’ve recently been contacted by some of the guys over on the TriumphRAT forum regarding my LED conversion kits for Lucas 564 rear lights. These LED light boards were originally designed for classic bikes which need every help possible to minimise load on their ageing electrical systems, but it seems that they might also have …
Following on from my previous post about the LED light units I have been working on for Lucas 564 rear lamps, I am pleased to announce that these are now available to buy online in the new Matchless Clueless store! The LED arrays are available in both 6 and 12 volt versions which are each …
I eventually got around to fitting my prototype LED rear light board for Lucas 564 rear lights to my Matchless over the weekend. It has sat on the side for the last few weeks after testing, so I thought it was about time I got it fitted within the Lucas lamp unit to see how …
I was asked how the LED rear light board I’ve designed and made for the Lucas 564 rear lamp of my Matchless motorbike compared with a standard 21/5W filament bulb. I knew from the development work I’d done over the last couple of months that it was bright, but I needed to see how bright …
I’ve been working on a project to design and produce an LED light unit for the Lucas 564 rear lamp of my Matchless motorbike for the past month or two. I now have a working prototype which I’m quite happy with, so thought I’d share some photo’s of it with you. The reason behind this …